Your Automation Expertise Starts Here
At our training facility, your personnel have the opportunity to enhance their qualifications in the following key areas of automation technology:
Programming of REGUL industrial controllers
Programming of SIMATIC S7 controllers
Software packages (SCADA systems): WinCC, PCS 7, TIA Portal, Alpha.Platform
Variable frequency drives: SIMOVERT MASTERDRIVES, MICROMASTER, SINAMICS
DC drive converters: SIMOREG DC-MASTER, SINAMICS DCM
TRAINING PROGRAMS
KASKAD Software Package – Basic Training
140 000₽
Programming of industrial controllers in the CODESYS development environment.
Programming of industrial controllers in the CODESYS development environment.
50 000₽This course is intended for attendees seeking to acquire fundamental knowledge and practical skills in programming within the CODESYS environment (abbreviated from Controller Development System) — a comprehensive software tool suite used for developing application software for industrial automation systems.
Alpha platform communication protocols with PLCs and peripherals
Alpha platform communication protocols with PLCs and peripherals
56 000₽This course is designed for students who wish to gain additional knowledge and skills in operating and configuring the Alpha platform's core communication protocols with mid-range and field-level devices.
Project developer on Alpha.One+ / Alpha.SCADA / Alpha.Platform
80 000₽The course intended for listeners, who wish get basic knowledge design project automatization high-level in system Alpha ONE+/SCAD, introduces their purpose, architecture, distinctive properties and features.
Controllers of the REGUL family
70 000₽The kurs intended for listeners, which wish get basic knowledge by sistem automation on REGUL controllers for problem solving with using this technics
Programming of LOGO universal logic modules!
32 000₽The course is intended for automation professionals seeking to use LOGO! modules for solving routine (simple) automation tasks.
SIMATIC S7-200 programming
64 000₽The course is intended for engineers involved in the development and implementation of enterprise process automation systems (process control systems) based on SIMATIC S7-200 family controllers, as well as for maintenance personnel.
Maintenance of SIMATIC S7 300/400 controllers
48 000₽The course is intended for maintenance personnel of process automation systems implemented on the basis of SIMATIC S7-300 and S7-400 family controllers.
SIMATIC S7 300/400 controller programming basics
75 000₽The course is intended for participants who wish to gain basic knowledge of automation systems based on SIMATIC S7 controllers in order to solve simple tasks using this equipment.
Advanced programming of SIMATIC S7 controllers
75 000₽The course is intended for specialists with experience in programming SIMATIC S7 controllers who wish to expand their knowledge.
S7-SCL programming language
75 000₽The course is intended for participants who wish to gain programming skills for SIMATIC S7 controllers using the high-level language S7-SCL.
The S7-GRAPH programming language
32 000₽The course is intended for participants who wish to gain programming skills for SIMATIC S7 controllers using the high-level language S7-GRAPH.
CFC editor for developing SIMATIC S7 controller programs
75 000₽The course is intended for programmers who wish to gain programming skills for SIMATIC S7-300/S7-400 controllers in the CFC environment.
Communications for SIMATIC S7 controllers
48 000₽The course covers the capabilities and methods of constructing local control networks based on SIMATIC S7 controllers.
Redundant S7-400H controllers
75 000₽The course is intended for specialists involved in maintenance, configuration, and programming of automation systems using S7-400H redundant controllers.
Basic SIMATIC S7 programming in TIA Portal
75 000₽The course is intended for participants who wish to gain basic knowledge of automation systems based on SIMATIC S7-1200/1500 controllers and the TIA Portal package.
Advanced programming of SIMATIC S7 controllers in TIA Portal
75 000₽The course is intended for specialists with experience in programming SIMATIC S7 controllers in TIA Portal who wish to expand their knowledge.
TIA-SCL programming language
75 000₽The course is intended for participants who wish to gain programming skills for SIMATIC S7-1200/1500 controllers using the high-level language TIA-SCL.
The TIA-GRAPH programming language
32 000₽The course is intended for participants who wish to gain programming skills for SIMATIC S7-1200/1500 controllers using the TIA-GRAPH language.
Building Visualization and Control Systems with BASIC and COMFORT Panels in TIA Portal
48 000₽The course is intended for participants involved in the development, implementation, and maintenance of projects that use BASIC and COMFORT series operator panels or personal computers as the visualization system, designed using the TIA Portal environment.
Building Visualization and Control Systems with WinCC Professional in TIA Portal
75 000₽The course is intended for engineers and programmers in the field of process visualization systems who wish to gain basic knowledge of the TIA Portal system.
TIA-Startdrive: Working with SINAMICS G120 Drives
64 000₽The course is intended for specialists involved in installation, commissioning, programming, and operation of SINAMICS G120 family drives. The course covers the application of SINAMICS G120 family converters for various drive tasks, methods for setting up and optimizing drives, diagnostic techniques, as well as the integration of drives into SIMATIC automation systems.
TIA-Startdrive: working with SINAMICS S120 electric drivers
64 000₽The course is intended for specialists involved in installation, commissioning, programming, and operation of SINAMICS S120 family drives. The course covers the application of SINAMICS S120 family converters for various drive tasks, methods for setting up and optimizing drives, diagnostic techniques, as well as the integration of drives into SIMATIC automation systems.
Building visualization and control subsystems using the WinCC package
75 000₽The course is intended for engineers and programmers in the field of process visualization systems who wish to gain basic knowledge of the WinCC system.
Building visualization and control subsystems using the WinCC package. Advanced course
75 000₽The course is intended for engineers and programmers in the field of process visualization systems who have basic knowledge of the WinCC package and wish to enhance their qualifications in this area.
Basics of engineering in WinCC flexible
48 000₽The course is intended for engineers and programmers involved in process visualization systems using SIMATIC OP operator panels.
SQL in the WinCC visualization system
75 000₽The course is dedicated to acquiring skills in writing basic Transact-SQL queries for Microsoft SQL Server 2012/2014. At the same time, the practical part of the course is closely related to the standard database structure of WinCC, which will provide additional support for specialists working with this SCADA system. Simultaneously, participants are given the necessary foundation for further development in areas such as database development and administration.
Using the VBA programming language to generate and print various protocols in Excel from WinCC
75 000₽The course is dedicated to acquiring skills in writing VBA programs to generate and print various protocols in Excel from WinCC. At the same time, the practical part of the course is closely related to the standard database structure of WinCC, providing support for specialists working with this SCADA system.
Using the ANSI-C programming language in WinCC
75 000₽The course is designed for mastering various capabilities of the ANSI-C programming language and acquiring skills in writing programs in WinCC. At the same time, the practical part of the course is closely related to the standard database structure of WinCC, providing support for specialists working with this SCADA system.
Engineering in the SIMATIC PCS7 system
80 000₽The course is intended for engineers and programmers involved in the automation of large-scale production processes using the PCS 7 system.
Designing in the SIMATIC PCS7. Advanced course
85 000₽The course is intended for specialists involved in software development for automation systems in the PCS 7 environment, who have basic skills from the introductory PCS 7 course and wish to expand their knowledge.
SIEMENS drive technology
75 000₽The course is intended for specialists involved in the installation, commissioning, and operation of Siemens power converters. The course covers the application of converter technology for various drive tasks, methods for setting up and optimizing converters, as well as diagnostic techniques.
SIMOREG DC-MASTER DC drive systems
32 000₽The course is intended for engineers and programmers who develop or maintain control systems in which the specified drives are installed.
Variable frequency drives MICROMASTER
32 000₽The course is intended for engineers and programmers who develop or maintain control systems in which the specified drives are installed.
SIMOVERT MASTERDRIVES VC variable frequency AC drive
32 000₽The course is intended for specialists involved in the installation, commissioning, and operation of SIMOVERT MASTERDRIVES frequency converters from Siemens.
Maintenance SINAMICS S120
32 000₽The course is intended for programmers, maintenance engineers, commissioning engineers, and service and technical personnel.
Electric drives of the SINAMICS S120 family
64 000₽The course is intended for specialists involved in installation, commissioning, programming, and operation of SINAMICS S120 family drives.
SINAMICS DC MASTER DC-DC Converters
64 000₽The course is intended for programmers, maintenance engineers, commissioning engineers, and service and technical personnel.
Electric drives of the SINAMICS G120 family
64 000₽The course is intended for specialists involved in installation, commissioning, programming, and operation of SINAMICS G120 family drives.
Integration of electric drives into SIMATIC automation systems
75 000₽The course is intended for programmers involved in the integration of Siemens drives into automation systems developed on the basis of S7-400 series controllers using the SIMATIC PCS 7 software and hardware platform.
Danfoss VLT Series Electric Drives
48 000₽The course is intended for specialists involved in installation, commissioning, programming, and operation of VLT Automation Drive FC 301/302 family drives.
Basics of programming TM1703 ACP controllers
Call for priceThis course is intended for process automation engineers in the power industry who will be responsible for maintaining controllers on site.
Advanced Course in Programming TM1703 ACP controllers
Call for priceThis course is intended for engineers involved in the development of process automation systems (APCS) in the power industry.
Development of software based on the SIEMENS SICAM PAS complex
Call for priceThis course is intended for process automation engineers in the power industry who will be operating this system on site.
Development of software based on the SIEMENS SICAM CONTROL CENTER complex
Call for priceThis course is intended for process automation engineers in the power industry who will be operating this system on site.
Relay Protection and Automation Basics. Configuring and Testing the Protection Functions of a SIPROTEC Microprocessor Terminal Using DIGSI
Call for priceThe course is intended for maintenance personnel of protection and control systems for power facilities, implemented on the basis of Siemens SIPROTEC 4th generation microprocessor devices.
